Products

The AT1700M/AT1600E series multiplexer is a high performance cost-effective broadband RF switching solution. Combined with the AT2500 series spectrum analyzers, the AT1700M/AT1600E multiplexer is the ideal solution for headend testing and return path monitoring.

AT2500-3G is the industry’s most complete 3 GHz advanced spectrum analyzer and multi-standards test solution. Incorporating a high-resolution color touch-screen, the AT2500-3G features 3 GHz spectrum analysis, D3.1 OFDM Analysis, digital channel, VeCheck, MPEG analysis and Ethernet test capabilities. Comprehensive SLM measurements include Single Channel, Headend Check, and FCC Digital POP tests.

The CaLan 3010H+ Sweep System is designed for prequalification, installation, and maintenance of DOCSIS 3.1 and 4.0 networks. The unit consists of a high performance, 1.8 GHz Transmitter and a low noise, 204 MHz Receiver, capable of sweeping the entire Forward and Return path respectively.

The CX41 is a small, ultra-portable, and budget-friendly Time Domain Reflectometer (TDR), ideal for Outside Plant (OSP), and Hybrid Fiber Coax (HFC) network installation and maintenance. Its accurate time-of-flight (Delay) measurement mode makes it a must-have tool for GNSS antenna feed installation and 1PPS precision timing distribution, among other applications.

The CX180F Probe in the VeSion® monitoring system checks the performance of analog and digital channels being transmitted downstream or toward customers across a CATV HFC network.

The VeSion® Return system monitors the return path for noise, UCD and ingress that interfere with DOCSIS communications. With DOCSIS 3.0/3.1 deployments, higher order upstream QAM modulation and channel bonding are more vulnerable to ingress and should be monitored continuously to ensure peak performance.

The CX280X features all-in-one RF Monitoring with QAM, DOCSIS 3.1, and Fast MPEG monitoring and analysis.

The CX310 is equipped with a true DOCSIS 3.1 / 32x8 Cable Modem supporting OFDM measurements as well as VeTest throughput capabilities. Comprehensive SLM features include Single Channel, VeCheck Full Band Scan, Tilt and Ingress. These key capabilities are the basis of the Home Installation Process (HIP) Auto test, enabling Home Certification conformance testing.

The CX380C features fast 1.8 GHz Spectrum Analysis and Sweep, DOCSIS 3.1 OFDM, Full SLM, V-Test Speedtest, OPM and TDR/DMM.

In a DOCSIS 3.0 (Data Over Cable Service Interface Specification) environment, the upstream bandwidth becomes crowded with wider and higher order QAM modulation carriers and channel bonding, leading to increased impairment sensitivity. In addition, the increasing ubiquity of DOCSIS cable modems actually represents one of the significant challenges for maintaining good plant health. The modems themselves can be serious interferers. In order to take a truly ‘proactive’ vs. ‘reactive’ approach in network monitoring, it is important to first detect the plant issues before it becomes significant enough to impact subscribers; then correlate the identified issue(s) to the physical location(s) of the modems contributing harm to the cable plant.

The ergonomically designed DI-1000 connects directly to VeEX test sets through its USB 2.0 port. The DI-1000 features an easy single-finger focusing knob, comprehensive list of tips and digital image sensor and optics with detectable resolution to 0.5 μm.

Optimized for testing MTP/MPO connectors retaining backwards compatibility with existing single fiber tips. The scanning and focus knobs are conveniently located on the microscope body providing simple and efficient handheld operation. The host device software performs visual inspection, image capture, and Pass/Fail results.

WiFi connectivity enables tether-free operation with Android or Apple iOS mobile devices including select VeEX test platforms. USB operation is available for Windows PC applications or when WiFi use is prohibited. One-touch auto-focus along with powerful host software ensures fast, reliable connector inspection and endface analysis according to relevant IEC standards.

Compact, rugged optical fiber multimeter for novice and service activation technicians to certify optical links within 30 seconds, with single fiber connection. Press Start and let our smart V-Scout link mapping technology with in-line OPM for single or dual PON 1490/1577 nm signals do all the work for you. Fiber inspection scopes are also available.

Software solutions for remote optical testing and data post-processing for managing test data and generating reports that integrate OTDR, link map, GPS coordinates, OLTS (loss and ORL), connector inspection, and captured images. Available for Window PC, Mobile Apps (Android, iPhone and iPad devices) and Fiberizer Cloud.

The Next Generation FX120 is an all-in-one advanced PON analyzer with a native RJ45 port and an SFP+ cage to support Layer 4+ testing. Ideal for service technicians tasked with service activation and resolving complaints, the FX120 monitors activation process by displaying downstream/upstream power levels as well as OLT/ONT IDs and status and TC-Sync. Certify QoE using optional Speed Test and V-PERF to check internet connectivity and speed up to 10 Gbps. Optional end of fiber detection feature allows technicians to check drop cables length before testing.

Standard OTDR or PON optimized OTDR with up to 256,000 data points and 3 cm resolution, the FX150+ mini OTDR offers superior measurement accuracy for installation, maintenance and troubleshooting of FTTx, Mobile FrontHaul/BackHaul and Metro fiber networks. The compact, lightweight test set can be incorporated with power meter, light source, fiber inspection probe and VFL test options which add exceptional versatility to the unit.

Compact Channel Checker Verifying CWDM or DWDM Channels and Power. Simultaneously test all 18 CWDM channels or 97 DWDM channels C14-62 in a single test. This compact, robust tester measures individual channel peak wavelength/frequency and total, composite power. An optional fiberscope is also available to inspect connectors.

The FX182 is the industry’s first compact Channel Checker to measure both CWDM and DWDM (C&L) band channels in less than 3 seconds. Innovative color-coded display identifies frequency, signal level, pass/fail and marginal channels at a glance*.

Fiberizer® software for Windows® Desktop, Android™, and/or Apple® mobile devices is available to assist in data transfer, record management, and report generation for various VeEX fiber optics testers. View the Fiberizer webpage for more details.

The FL41 is a budget friendly and palm-sized Fault Locator/ Optical Power Meter for measuring fiber spans up to 20 km in length. The FL41f has a built-in filter for in-service fault locating. The FL41 is the perfect tool for service activation technicians who need to measure short fiber links and drop fiber for PON, 5G rollout, FTTx, LAN/WAN, and CATV.

Provides fast, simple, and precise measurement of G-PON and XGS-PON downstream signals. Miniature filters ensure each wavelength is measured accurately. The tester is well suited for installation, service verification, and troubleshooting of co-existent networks, including IEEE based E-PON and 10G-EPON deployments.

Fiberizer® software for Windows® Desktop, Android™, and/or Apple® mobile devices is available to assist in data transfer, record management, and report generation for various VeEX fiber optics testers. View the Fiberizer webpage for more details.

Optical power meter for installation, service activation and troubleshooting of B/GPON, XG(S)-PON, 25G PON, EPON and 10G-EPON fiber networks. Pass-through design to measure multiple downstream and upstream signals simultaneously for ONU/ONT verification or non-pass through/terminated OLT verification.

The FX82 features excellent measurement accuracy over a broad wavelength and wide dynamic range in demanding test environments. The unit is calibrated at all legacy wavelengths while CWDM wavelengths can be added as an option. Automate multi-wave DWDM IL loss measurement and verify cable routes using our new Sweep Loss Test Kit, comprised of FX87s and FX82s meters.

The FX83 OLS is equipped with high performance lasers offering excellent wavelength and power stability over a broad operating temperature range. Each source features WaveID which can be used with compatible VeEX optical power meters for correct wavelength recognition. The source can be configured with up to four singlemode wavelengths (1310nm, 1490nm, 1550nm, or 1625nm) on a single output port for verifying FTTx/PON telecom, CATV or government/defense fiber network applications. Alternatively, up to four wavelengths (850/1300nm multimode* and 1310/1550nm singlemode) can be configured on two individual ports for testing LAN/WAN access and enterprise/data centers utilizing both multimode* and singlemode fiber types. The multi-wave (loop) function automatically toggles through all wavelengths for faster loss measurements.

The FX84 OLTS combines power meter and light source functions into a single test unit. Individual test ports provide uni-directional loss measurements allowing two technicians on opposite ends of a fiber link to test simultaneously. The auto-loop feature toggles the light source wavelengths, while the remote or local OPM test partner detects the incoming wavelength/s automatically using the WaveID feature.

The FX86 is a four port laser source used to verify, install and commission CWDM and PON networks. Verify wavelength routing and troubleshoot passive CWDM network elements or verify multiple PON drops with unique identifiers. Optimized for Access & Metro CWDM or PON test applications.

The FX87 DWDM TLS can be tuned to any G.694.1 channel on the 50 GHz frequency grid over the C-band spectrum. Test applications include verifying end-end wavelength routing and troubleshooting passive Multiplexer and Demultiplexer network elements. Optimized for Fiber Deep, Metro and Core networks employing DWDM technology. Automate multi-wave DWDM IL loss measurement and verify cable routes using our new Sweep Loss Test Kit, comprised of FX87s and FX82s meters.

VeEX™ MLX100 Metro Loopback Expert is an intelligent Ethernet loopback device developed as a perfect companion to the MX100+, MX120+, MX300, and TX300 products. Loopback control can be performed in-band or via the built-in 10/100Base-T Ethernet port via an Internet connection. When paired with the compatible MX/TX series, the MLX100 is the industry’s most costeffective solution for point-to-point Service Level Agreement (SLA) verification and end-to-end performance testing.

The MPA® Multi-Protocol Analyzer is an advanced packet optical transport traffic generation and analysis platform specifically designed for the demands of R&D, SVT, and manufacturing testing environments. The MPA provides simultaneous independent multi-port testing from 1G to 400G for Ethernet/IP, OTN & SDH/SONET and Fibre Channel.

The MPM-100AR Multi-Protocol Module is specifically designed to meet the test and measurement challenges of developers and early adopters of next generation Ethernet/IP, Fibre Channel, OTN & SONET/SDH ASICs, optics, transport/switching modules, and service delivery.

This advanced module provides up to 800G of throughput to address the high capacity testing demands of the next generation PAM4 Ethernet/transport market.

Advanced test solution for R&D, SVT, and production verification of high performance pluggable coherent CFP2-DCO and QSFP-DD transceivers and applications.

The MPM-400G Multi-Protocol Module is specifically designed to meet the test and measurement challenges of developers and early adopters of 400G ASICs, CFP8 optics, transport/switching modules, and service delivery.

The MPM-600G Multi-Protocol Module is an advanced multi-port QSFP28 test module for high density 40/100G and next-generation OTUCn & FlexE applications.

The MTTplus platform builds on the legacy of the legendary MTT®, providing a compact, powerful and cost-effective modular test toolkit for today’s wide range of evolving test needs. The compact MTTplus Modular Test Platform addresses the challenges of communication service providers to increase efficiency and productivity. The flexible test platform lowers operational and capital expenditures associated with handling multiple technologies required to address today’s Access, Business, Carrier Ethernet, Transport and Core services.

MTT® Plus SHDSL Test Module provides CPE installation, CO emulation pre-qualification, and IP/ATM services testing capabilities for service installation and verification. The module is based on the industry leading Lantiq SOCRATES chipset, offering best-in-class SHDSL performance and interoperability. SHDSL is ideal for business class services, enterprise networks, and industrial communications that must rely on legacy copper based networks where fiber remains cost prohibitive. Utilizing SHDSL’s multiple pair bonding application enables robust data transmission over long copper lines.

The MTTplus-320 Multi-Service Module is a full-featured test solution for OTN, SONET, SDH, PDH, DSn, 64k Codirectional, C37.94, Carrier Ethernet, Fibre Channel, SyncE, PTP and CPRI/OBSAI.

The MTTplus-340 test module offers advanced test solutions for Access, Metro and Carrier Ethernet, supporting OTN, SONET/SDH, PDH/DSn, Fibre Channel, CPRI, C37.94 and Synchronization. This compact and flexible test platform helps service providers increase efficiency and productivity. It lowers OpEx and CapEx associated with handling multiple technologies required to address today’s Access, Business, Carrier Ethernet, Transport and Core services.

The MTTplus-410+ Fiber Optics test module for the VeEX® MTTplus platform now has up to 500,000 data points with 3 cm resolution. The MTTplus-410+ supports a full range of test functions including OTDR, OPM, Light Source and VFL. GPS coordinates and images can be embedded into the OTDR sor files and PDF test report provided the MTTplus platform is configured with GPS and Camera options. Fiberizer® software for Windows® Desktop, Android™, and/or Apple® mobile devices is available to assist in data transfer, record management, and report generation for various VeEX fiber optics testers. View the Fiberizer webpage for more details.

The new MTTplus-420 GPON test module for the VeEX® MTTplus platform is designed for service activation at the ONT location. The unit checks optical power levels and non-intrusively decodes the messages exchanged between the OLT and ONT allowing technicians to perform advanced troubleshooting.

The MTTplus-522 Outside Plant (OSP)+ Expert Module combines key copper verification features with DSL/G.fast modem emulation. It is designed for Service Providers deploying broadband services over a DSL or G.fast access network.

The MTTplus-523 Module addresses key test requirements for IP based broadband services deployed over a G.fast or DSL Access network.

The MTX150 is a fully integrated and self-contained 10G multi-service test solution for Internet, Ethernet (LAN/WAN), SyncE, Fibre Channel (SAN), SDH, SONET, PDH, DSn, IEEE C37.94™, G.703 Codirectional, and Datacom interfaces. This all-in-one, rugged and ultra-portable field handheld test set can be configured with interfaces and technologies required by field technicians to install, verify, maintain and troubleshoot Transport, Metro, Edge, Access communication links and services up to 10 Gbps, including legacy ports and applications.

The MTX150x is a fully-integrated and self-contained Ethernet services test solution for Layer 1-to-4+ applications and Fibre Channel (SAN). This rugged and ultra-portable field hand-held test set can be configured with interfaces and technologies required by field technicians to install, verify, maintain and troubleshoot Metro Ethernet links, Business services, Internet Access and other packet-base services up to 10 Gbps. Its native support for 2.5G/5G/10GBASE-T reduces cost of ownership.

The MTX150x Lite is an optimized Quality of Experience (QoE) test solution (Layer 4+ applications) for multi-Gigabit services from 10 Mbps to 10 Gbps on copper and fiber interfaces. This rugged, self-contained, and ultra-portable hand-held test set helps field technicians install, verify, maintain, and troubleshoot high-speed Residential and Business services, Internet Access and other packet-base services up to 10 Gbps. Its native support for 2.5G/5G/10GBASE-T reduces cost of ownership.

VeEX's patent pending NoApp™ uses QR code technology to process data from small meters to more advanced test sets efficiently as part of our vision to streamline workflow and reporting. Our cloud service enables test sets to quickly and easily transfer test result KPIs to a phone, tablet or PC. Users can instantly generate test reports and allow them to be shared or uploaded to centralized R-Server or cloud.

The OPX-BOXe is an ultra-compact, OTDR designed to operate remotely using Fiberizer® software. The unit can be controlled via WiFi, Bluetooth or USB from iOS, Linux or Android devices.

VeEX® OXA-4000 series optical test access unit is used with the RTU-4000 fiber probe to support network monitoring of dark or in-service fiber networks. The OXA-4000 provides reliable, fast, and repeatable performance and is controlled via RTU-4000.

The OXC-4000 series switches are designed specifically for testing fiber dense networks and can be controlled directly by the RTU/RFTS test probe or remotely via VeEX's VeSion server. It can be easily cascaded to allow a single RTU to monitor up to 4608 fiber ports. The OXC-4000 can be located with the RTU or even off-site at nodes with multiple fiber branching and controlled over ethernet.

The RFTS-400 modular platform design incorporates Optical Control Module (OCM) and Optical Switching Modules (OSM) that support fiber monitoring expansion from 8 to 108 ports in the 1U rack. A fully scalable system that can be expanded to support up to 4608 monitoring ports

The RTU-300 platform is a rack-mounted centralized test solution specially designed for service turn-up and maintenance test applications. The RTU-300 can be remotely accessed via a web browser or VNC when configured for standalone operation, or it can be operated and integrated into the VeSion® cloud-based system. Features include 1G to 100G Ethernet test applications, including high performance stateful TCP suites, like RFC6369, required for repeatable and reliable testing of broadband or IP access services. When the RTU-300 platform is configured for standalone operation additional features are supported like OTN, SDH/SONET, Fibre Channel, and CPRI.

The RTU-320 hardware option for the RTU-300 standalone platform offers a full-featured centralized test solution for Ethernet, OTN, SONET/SDH, PDH/DSn, Fibre Channel and CPRI/OBSAI. This factory-installed hardware option allows flexibility to fit any application, such as the addition of a second RTU-320 or 100G (RTU-600) to be installed concurrently in the same test platform.

Part of the VeSion® cloud-based system, the RTU-300 platform with the RTU-320 and RTU-600x module tests Ethernet/IP network performance. Features include dual plug-in module support with up to four dedicated test ports for optimized testing.

Available in stand-alone or combined with other modules, the RTU-600x hardware option for the RTU-300 standalone platform offers a full-featured centralized test solution for Ethernet links and services testing — from 10 Mbps and 100 Gbps. This low-cost factory-installed hardware option allow flexibility to fit any modern Core, Metro, NOC, PoP, mobile backhaul, and datacenter applications.

The Remote Fiber Test System (RFTS) comprises the RTU-4000 platform with the RTU-4100 OTDR optical test module. The RFTS monitors optical fiber infrastructures in Core, Metro, Access and FTTx/PON networks, improving workflow and reducing Mean Time to Repair (MTTR). The RFTS can be operated in standalone mode or as part of a centralized Monitoring System.

The RXT® is the industry’s most flexible, compact, and future-proof hand-held test solution for core, datacenter, metro, access and fiber optics applications. The forward-looking RXT-1200™ family of test platforms address the challenges of communication service providers to increase efficiency and productivity. These flexible test platforms lower operational and capital expenditures associated with handling multiple technologies required to address today’s Access, Business, Metro, Datacenter, Transport and Core services, as well as keeping up with future technologies and testing requirements.

The RXT-3400 add-on module for the versatile RXT® test platform offers state-of-the-art support for Access, Metro, Core, Transport, Carrier Ethernet, Backhaul, Fronthaul and SAN technologies up to 16GFC. VeEX RXT® is the industry’s most flexible, compact, complete and future-proof hand-held test solution, from 64k to 400GE, including Fiber Optics and WDM.

The RXT-4100+ Fiber Optics test module is the world’s first field portable OTDR to offer up to 500,000 data points with 3 cm resolution. The RXT-4100+ OTDR modules feature a range of Optical test functions including OTDR, OPM, Light Source and VFL. Multi-protocol OTN, SDH/SONET, Ethernet, Fibre Channel and Synchronous Packet Networks utilizing optical fibers can easily be verified as well as OSA testing on CWDM/DWDM network with a single test platform ensuring maximum test productivity. Fiberizer® software for Windows® Desktop, Android™, and/or Apple® mobile devices is available to assist in data transfer, record management, and report generation for various VeEX fiber optics testers.

The new RXT-4113+ is our latest generation xWDM OTDR module. Users can now select CWDM, DWDM, combo CWDM+DWDM or DWDM+Legacy optical configurations. Advanced hardware and powerful software supports the testing of both xWDM, Grey optics and single stage PON network architectures. Precise wavelength tuning, 3 cm resolution and up to 500,000 data points offers unprecedented network characterization.

The RXT-4500/4510 OSA modules are Optical Spectrum/Channel Analyzers for CWDM and DWDM networks. Using superior micro-optic design and MEMS tuning technology, the modules measure key optical parameters such as wavelength, channel power, and OSNR.

The RXT-6000e is the most complete and flexible portable 100G test set in the market. Equipped with most common transceiver form-factor ports and optional legacy test interfaces, this module is a perfect complement to the RXT® Platform, extending its testing range to 100 Gbps and offering up to two simultaneous 100GE tests.

VeEX® RXT is the industry’s most flexible, compact, and future- proof hand-held test solution for core, metro and access. The RXT-6200 module adds Ethernet, 5G/4G Mobile Backhaul and Fronthaul, Storage Area Networks, OTN, SDH/SONET, PDH/T-Carrier links and services testing, from 1.5/2 Mbps up to 100 Gbps.

First native OSFP & QSFP-DD PAM4 400GE Test Equipment, in true portable form factor, enabling 400GE technologies’ Lab-to-Field Transition and leading the early deployment for datacenters and telcos. It offers testing capabilities from 1GE to 400GE.

As 400GE technologies advance and start to become mainstream, beyond Ethernet-centric datacenters, multi-functional test equipment, capable of addressing different technologies are a must. The RXT-6402 offers dual port capabilities for legacy, current and future test interfaces, required for testing AOC/DAC cables, long-reach coherent transceivers, fan-out active cables, network element wrap-around, as well as traditional Ethernet and TDM interfaces from 400G down to 1.5M.

Rugged, battery operated device for qualification and maintenance of CATV Plant Spectrum Expansion to 1.8 GHz. Comprises a complete field Sweep System with the CX380C Field Maintenance Meter.

VeEX® VePAL TX300s Family is a fully-integrated and self-contained multi-service test solution for OTN, SDH, SONET, PDH, DSn, Fibre Channel, Ethernet, Mobile Backhaul, CPRI/OBSAI and Fiber Optics networks. Equipped with SyncE, 1588v2 PTP, and CPRI/OBSAI test options, the unit offers unprecedented synchronization turn-up and troubleshooting test functions for mobile operators migrating to 4G LTE. Powered by the VeExpress™ system, TX300s users are able to share test options, either purchased or leased, with multiple devices, dramatically reducing Opex and Capex.

The TX300s-100G modules offer a variety of latest or legacy in pluggable optical interface technologies. It is a perfect complement to the TX300s Platform, extending its testing range to 100 Gbps. In combination with the TX340sm module, it offers a complete multi-service test solution from 64k to 100G, in a compact portable package.

The Fiber Optics test option for the VeEX® VePAL TX300s adds a full range of Optical test features that support OTDR, OPM, Light Source and VFL. Together with Advanced OTN, SDH/SONET, PDH/DSn, Ethernet, Fibre Channel, and Synchronous Packet Networks support, the TX300s offers a complete network test solution from physical layer up to higher layers of multi-service performance testing.

The TX340s hardware option for the TX300s portable test platform offers advanced test solutions for OTN, SONET/SDH, PDH/DSn, Carrier Ethernet, Fibre Channel and CPRI/OBSAI. This factory-installed hardware option allows flexibility to fit any application, for example, the addition of a second TX340s, 100G or OTDR module, to be installed concurrently in the same test platform.

VeEX’s VeSion is a cloud-based one system platform, representing the next step in innovation. It integrates VeEX’s Preventive RF Monitoring (Return and Forward), Fiber and PNM (Return and Forward), MPEG, Ethernet, Advanced DOCSIS Monitoring, DOCSIS Burst Demodulation, Sweep, Workflow and Asset Management systems all under one umbrella. This provides MSO’s complete network visibility (VeSion) and reduces unnecessary Truck Rolls by alerting key personnel via SMS and/or emails to alarm conditions and location. In addition, VeSion links directly with an MSO’s billing system, allowing them to pin-point the exact location of the DOCSIS cable modem problem.

Part of VeEX’s VeSion® centralized monitoring and management solutions, the R-Server Workflow and Asset Management system provides crucial tools to manage fleets of technicians, test equipment, standardized test profiles, thresholds, centralized test results collection, reporting, jobs/ticketing, and software update delivery to create coordinated and efficient disciplined workforce and test procedures. R-Server enhances the workflow to achieve the level of quality and repeatability required by telecommunications service providers, MSOs and their contractors. The flexible R-Server can be deployed in cloud, hosted, and corporate networks, on physical or virtualized servers.

VeEX’s WiFi Air Expert® provides the tools for reliable, repeatable install procedures that go beyond RF layer analysis. It provides complete performance testing that measures end user’s experience under traffic load.