TX340s Module

All-in-one Optical and Service Test Platform

Advanced Multi-Service Test Option

The TX340s hardware option for the TX300s portable test platform offers advanced test solutions for OTN, SONET/SDH, PDH/DSn, Carrier Ethernet, Fibre Channel and CPRI/OBSAI. This factory-installed hardware option allows flexibility to fit any application, for example, the addition of a second TX340s, 100G or OTDR module, to be installed concurrently in the same test platform.


  • Flexible, all-in-one multi-service test solution, from 64 kbps to 16 Gbps (can be combined with 100G and OTDR modules)
  • Transport, Core, Metro, SAN, Backhaul and Fronthaul applications
  • Supports up to four test port groups with independent and simultaneous measurements
  • Test cards summary provides an overview of up to four running tests, as well as test application switching and management functions

OTN/SDH/SONET/PDH/DSn

  • Advanced flexible OTN, SDH/SONET, PDH/DSn test payload map/mux, including EoOTN (ODU2e, ODU0 and ODUflex)
  • Overhead Monitoring and Byte decoding
  • Protection Switching and Service Disruption time
  • Round Trip Delay on all interfaces and payload mappings
  • Tandem Connection Monitoring
  • Jitter and Wander (E1, E3, DS1, DS3, STM-1o, OC-3)
  • Pulse Mask Analysis at E1, E3 and DS1, DS3 rates

Fibre Channel

  • Storage Area Networks (SAN) testing up to 16G
  • BERT and Throughput test
  • RFC2544: Throughput, latency, frame loss, back to back tests
  • Layer 1 and layer 2 loopbacks

CPRI Testing

  • Common Public Radio Interface standard (CPRI): Unframed, Layer 1 Framed and Layer 2 tests (REC/BBU and RE/RRH emulation)
  • Open Base Station Architecture Initiative (OBSAI): Unframed tests
  • BER testing with PRBS stress patterns
  • Latency measurements

Ethernet

  • RFC2544 Throughput, latency, frame loss and back to back tests
  • V-SAM test suite compliant with ITU-T Y.1564 standard
  • IEEE 802.3ah, ITU-T Y.1731, IEEE 802.1ag, MPLS-TP OAM support
  • Q in Q (VLAN stacking), MPLS, MPLS-TP, PBB support
  • RFC6349 V-PERF TCP test suite
  • Layer 2 Control Protocol Transparency test
  • In-service monitoring with frames capture and on-screen protocol decode
  • One way latency with optional built-in GNSS receiver
  • Fully integrated solution for synchronized packet networks
  • Supports IEEE 1588v2/PTP and SyncE/ITU-T G.8261 standards
  • Master Clock and Slave clock emulation
  • IEEE 1588v2/PTP protocol monitor & decode, and PDV analysis
  • Wander measurement and MTIE/TDEV analysis
  • ESMC SSM generation, monitoring, and decoding
  • VoIP and IPTV testing

IEEE C37.94™

  • Power/Utilities Teleprotection Network testing
  • BERT, SDT/APS, RTD, and transparency tests
  • Passive bidirectional Monitoring and intrusive Pass-Through modes
  • GNSS-assisted One-Way-Delay measurements
  • Jitter and Wander Measurements

Test Interfaces (per module)
Ports Technology Rates
2 SFP+/SFP Ethernet
Fibre Channel
OTN
SDH
SONET
CPRI
IEEE® C37.94
10GBASE-X, 1000BASE-X, 100BASE-FX, 10GBase-T, 5G Base-T, 2.5GBase-T
16G, 10G, 8G, 4G, 2G, 1G FC
OTU2e, OTU1e, OTU2, OTU1
STM64/16/4/1/0,
OC192/48/12/3/1
12.168G down to 614.4M
64k to 768k
2 RJ45 Ethernet 1000/100/10Base-T
3 BNC2 SDH/SONET
PDH/DSn
STM1/0, STS3/1
E4, E3, E2, E1, T3
1 RJ481 PDH/DSn E1, T1, 64K Codirectional
2 SMA Clock (Ext.) 1PPS, 1.544/2.048/10 MHz,
2.048 Mbps, 1.544 Mbps

1Balanced ports available in RJ48 or Bantam connector.

2Tx1, Rx1, and Rx2. Rx2 port may be available for monitoring applications.


  • Flexible wavelength and bit rate options using industry standard pluggable optics
  • OTN: OTU2, OTU1, OTU2e, OTU1e
  • SDH: STM-64/16/4/1/0
  • SONET: OC-192/48/12/3/1, STS-3/1
  • PDH/DSn: DS1, DS3, E1, E2, E3, E4
  • EoOTN Testing with OTU1e, OTU2e, ODU0 and ODUflex with bulk, and Ethernet payloads
  • Coupled or independent Tx and Rx settings
  • Tandem Connection Monitoring
  • Service disruption testing (SDT) and APS
  • Round trip delay on all interfaces and payload mappings
  • Jitter/Wander Analysis (E1, E3, DS1, DS3 and STM-1o, OC-3)
Brochures
Release Notes
Software

Attention: DO NOT downgrade the software version currently installed in your test platform or module, unless specifically instructed by a VeEX Customer Care/Support agent. Your new test set may have been shipped with a newer version. For software upgrades, please check the current version(s) on your test set to confirm that the software posted here is a newer version and carefully read the Release Notes for the recommended platform versions.

Specification Sheet
Technical Notes
User Manuals
Request a Demo Contact Sales
Request a Quote Financing
Register a Product Locate a Partner

LOCAL PARTNERS

INFORMATIONAL DOWNLOADS

Advanced C37.94 Pass-Through
Testing Technical Note

Related Products