TX320s Module

OTN/SDH/SONET/PDH/DSn

• Optical SDH/SONET testing for STM-0/1/4/16/64 and OC1/3/12/48/192; including STM-0/1e (STS-1/3) electrical
• OTN testing for ODU0, ODU Flex, OTU1, OTU2, OTU1e/OTU2e
• PDH/DSn testing at E1, E2, E3, E4, DS1, DS3
• G.703 64k Codirectional interface testing
• Non-intrusive Pulse Mask Analysis at E1, E3 and DS1, DS3 rates
• Automatic Protection Switching and Service Disruption
• Round Trip Delay on all interfaces and payload mappings
• Bi-directional Overhead Monitoring and Byte decoding
• Tandem Connection Monitoring
• Jitter and Wander Analysis (E1, E3, DS1, DS3, STM-1o, OC-3)

CPRI/OBSAI Testing

• Common Public Radio Interface standard (CPRI): supports all rates from 614.4 Mbps to 9.8304 Gbps
• Open Base Station Architecture Initiative (OBSAI): supports all rates from 768 Mbps to 6.144 Gbps
• Unframed, Layer 1 Framed and Layer 2 (REC/BBU and RE/RRH emulation) BER testing with PRBS stress patterns
• Latency measurements
• CPRI Bi-directional monitoring mode

SCADA and Teleprotection

• IEEE C37.94 Testing
• Terminal and bidirectional pass-through monitor modes
• 64k to 768k (N: 1 to 12)
• BERT, Alarms and Round Trip Delay
• GPS-assisted one-way-latency (asymmetry)
• MMF and SMF optical interfaces
• G.703 64k Codirectional Testing
• Terminal mode
• BERT, Alarms and Round Trip Delay

Ethernet/Fibre Channel

• Dual 10GE LAN/WAN, 1000Base-X, 100Base-FX supported by SFP+ ports
• Dual 10/100/1000Base-T supported by RJ45 ports
• 1G/2G/4G/8G/10G Fibre Channel support for Storage Area Networks
• RFC2544 Throughput, latency, frame loss and back to back tests
• V-SAM test suite compliant with ITU-T Y.1564 standard
• Q in Q (VLAN stacking), MPLS, MPLS-TP, PBB support
• RFC6349 V-PERF TCP test suite
• Bi-directional in-service monitoring with Wireshark on-screen decode
• One way latency with optional built-in GPS
• Fully integrated solution for synchronized packet networks
• Supports IEEE 1588v2/PTP and SyncE/ITU-T G.8261 standards
• Master Clock and Slave clock emulation
• IEEE 1588v2/PTP protocol monitoring and decoding
• IEEE 1588v2/PTP PDV analysis
• Clock recovery from SyncE or PTP and output to physical port
• Wander measurement and MTIE/TDEV analysis
• ESMC SSM generation, monitoring, and decoding

Synchronization Testing

• Clock Wander and Phase (Time Error) Measurements
• MTIE/TDEV Wander Analysis
• Optional built-in chip-scale Atomic Clock
• GPS receiver for disciplining and time alignment
• SyncE and IEEE 1588v2 PTP emulation and Wander measurements