MTTplus-320

General

• All-in-one multi-service test solution, from 64 kbps to 10 Gbps
• Transport, Core, Metro, SAN, Backhaul and Fronthaul applications
• Supports independent and simultaneous measurements

OTN/SDH/SONET/PDH/DSn

• Advanced flexible OTN, SDH/SONET, PDH/DSn test payload map/mux, including EoOTN support (ODU0 and ODUflex)
• Overhead Monitoring and Byte decoding
• Automatic Protection Switching and Service Disruption
• Round Trip Delay on all interfaces and payload mappings
• Tandem Connection Monitoring
• Jitter and Wander (E1, E3, DS1, DS3, STM-1o, OC-3)
• Non-intrusive Pulse Mask Analysis at E1, E3 and DS1, DS3 rates

Fibre Channel

• Storage Area Networks (SAN) testing
• BERT and Throughput test
• RFC2544: Throughput, latency, frame loss, back to back tests
• Layer 1 and layer 2 loopbacks

CPRI/OBSAI Testing

• Common Public Radio Interface standard (CPRI): Unframed, Layer 1 Framed and Layer 2 tests (REC/BBU and RE/RRH emulation)
• Open Base Station Architecture Initiative (OBSAI): Unframed tests
• BER testing with PRBS stress patterns
• Latency measurements

SCADA and Teleprotection

• IEEE C37.94 Testing
• Terminal and bidirectional pass-through monitor modes
• 64k to 768k (N: 1 to 12)
• BERT, Alarms and Round Trip Delay
• GPS-assisted one-way-latency (asymmetry)
• MMF and SMF optical interfaces
• G.703 64k Codirectional Testing
• Terminal mode
• BERT, Alarms and Round Trip Delay

Ethernet

• RFC2544 Throughput, latency, frame loss and back to back tests
• V-SAM test suite compliant with ITU-T Y.1564 standard
• IEEE 802.3ah, ITU-T Y.1731, IEEE 802.1ag, MPLS-TP OAM support
• Q in Q (VLAN stacking), MPLS, MPLS-TP, PBB support
• RFC6349 V-PERF TCP test suite
• Layer 2 Control Protocol Transparency test
• In-service monitoring with frames capture and on-screen protocol decode
• One way latency with optional built-in GPS
• Fully integrated solution for synchronized packet networks
• Supports IEEE 1588v2/PTP and SyncE/ITU-T G.8261 standards
• Master Clock and Slave clock emulation
• IEEE 1588v2/PTP protocol monitor & decode, and PDV analysis
• Clock recovery from SyncE or PTP and output to physical port
• Wander measurement and MTIE/TDEV analysis
• ESMC SSM generation, monitoring, and decoding
• VoIP and IPTV testing