TX130/E+ DISCONTINUED
Replaced by MTX150xDSn/PDH, Datacom and Ethernet network testing simplified
The TX130/E+ platform offers customers a single, multifunctional access network diagnostic tool. Equipped with PDH/DSn, Datacom, G.703 64k Codirectional and Ethernet interface options, the TX130/E+ performs traditional ITU-T/ANSI transmission tests required by large telcos and wireless/mobile operators, Datacom tests for networks operating "V" type interfaces, as well as Ethernet tests for newer, IP-based networks. The TX130+ can also be equipped with ISDN PRI and VF channel analysis. The TX130/E+ is designed for field engineers that need an easy-to-use, handheld and battery-powered field unit. To simplify and ensure rapid testing, the unit auto-configures itself to the signal detected, minimizing operator involvement.
- Intuitive presentation of measurements with test graphics
- High resolution color touch-screen viewable in any lighting conditions fitted with protective cover
- Robust, handheld chassis packed with powerful and flexible features for demanding environments and test conditions
- Optimized for field engineers or technicians installing and maintaining transporting legacy network
- Ethernet port and connection for back office applications, workforce management and triple play service verification
- User defined test profiles and thresholds enable fast, efficient and consistent turn-up of services
- USB memory stick support and FTP upload capability for test result storage and file transfer respectively
- Maintain instrument software, manage test configurations, process measurement results and generate customer test reports using included ReVeal™ PC software
- Extend field testing time using interchangeable LiIon battery pack/s. Greater battery autonomy provided in standby mode
- Supports advanced IP testing; Ping, trace route, ARP Wiz, VoIP, IPTV, WiFi, web browser, and FTP upload/download via Ethernet or USB port where applicable
- Perform remote testing and monitoring using the remote control option via standard Ethernet interface
- Supports DS1/E1, DS3/E3, DSn/PDH bit rates
- G.703 64k Codirectional interface testing
- Balanced (120Ω) and Unbalanced (75Ω) interfaces for E1
- Balanced (100Ω) and Unbalanced (75Ω) interfaces for DS1
- Dual DS1/E1 Transmitters & Receivers for bi-directional testing
- Full Rate DS1/E1 and Fractional N, Nx64 kbit/s or Nx56 kbit/s testing
- Dual DS3/E3 Receiver
- Non-intrusive Pulse Mask Analysis at DS1, E1 and E3, DS3 bit rates
- Level and Frequency measurements
- Auto Configuration of network type, bit rate, line coding, framing, and test pattern
- Bit Error and Performance Analysis per ITU/Bellcore standards
- Error and Alarm Generation and Analysis
- Histogram and Event analysis for errors and alarms
- Round Trip Delay on all interfaces
- Transmit Frequency Offset to stress clock recovery circuits
- DS1 and DS3 Loop capability
- Datacom interface for RS-449 (422 and 423), X.21, V.35 and V.36
- Synchronous/asynchronous DTE/DCE mode of operation
- 10/100/1000-T Ethernet Testing for BERT, Throughput, Loopback and RFC2544 in single stream
- VF drop/insert by headset
- VF frequency/level measurement and VF send tone
- ISDN PRI (ANSI and ETSI) call set up
- Jitter analysis on all rates
Brochures
Release Notes
Software
Attention: DO NOT downgrade the software version currently installed in your test platform or module, unless specifically instructed by a VeEX Customer Care/Support agent. Your new test set may have been shipped with a newer version. For software upgrades, please check the current version(s) on your test set to confirm that the software posted here is a newer version and carefully read the Release Notes for the recommended platform versions.
Specification Sheet
Technical Notes
User Manuals
| Request a Demo | Contact Sales |
| Request a Quote | Financing |
| Register a Product | Locate a Partner |