The OX-MPO-12 is an ultra-compact, multi-fiber optical switch designed to operate with VeEX OTDRs. Optimized for high-density fiber test applications where MPO/MTP cables need to be tested using an OTDR equipped with a single fiber output.
- 12-fiber optical switch for MPO/MTP fiber cable characterization
- SC/APC input for OTDR connection
- Pinned MPO/APC output for MPO/MTP cable under test
- Protective dust caps for SC and MPO connectors
- Eliminates the requirement for multi-fiber break-out cables
- Powered/controlled over micro-USB interface by the OTDR
- Automated wizard procedure for patch-cord referencing
- Very fast boot-up time (<5 seconds)
- Rugged case design with impact resistant rubber bumpers
- Splash and dust resistant
- Data Center – Verify/troubleshoot structured cabling
- FTTH/Access Networks – Testing feeder cables between OLT and first splitter where MPO and/or ribbon fibers are used
- Wireless Fronthaul (FTTA/C-RAN) – testing MPO fiber links and connections in Base Band Unit (BBU)
- Number of fibers: 12
- Singlemode (9/125 μm) operation
- Wavelength range: 1270 to 1650 nm
- *Insertion loss: <1.5 dB (Typical), <1.8 dB (Max)
- Repeatability: ≤±0.01 dB
- Switching time: ≤30 ms (sequential channels)
- Input port: SC/APC
- Output port: Pinned MPO/APC, 12-fiber
- Optical Return Loss (ORL): ≥50 dB
- Weight: 450g (1lb)
- Power/Control: Via micro-USB interface from OTDR
* Specified at operating temperature, without connector losses and measured at 1310 and 1550
Brochures
Release Notes
Software
Attention: DO NOT downgrade the software version currently installed in your test platform or module, unless specifically instructed by a VeEX Customer Care/Support agent. Your new test set may have been shipped with a newer version. For software upgrades, please check the current version(s) on your test set to confirm that the software posted here is a newer version and carefully read the Release Notes for the recommended platform versions.
Specification Sheet
Technical Notes
User Manuals