CX350 DOCSIS 3.0DISCONTINUED
Replaced by CX350sCATV Network Testing Simplified
Industry's first integrated test solution supporting legacy analog CATV signals, high definition DVB-C carriers and DOCSIS 3.0 cable modem emulation/measurement in a single instrument. Standard features include a high performance dual band Signal Level Meter (SLM), forward/return path ingress measurement, deep interleaving support, and QAM constellation diagram and diagnostics. Optional features include a QAM+FEC Upstream Signal Generator (USG), a long range Time Domain Reflectometer (TDR) optimized for troubleshooting 75ohm CATV cables, a Forward and Return Path digital QAM Analyzer, and Advanced Signal Measurements which include an Adaptive Equalizer On/Off function to troubleshoot MER/BER problems produced by micro-reflections and related frequency and impedance impairments.
Equipped with built-in 10/100/1000-T/X Ethernet engine, copper (10/100/1000-T) and fiber (1000-X) interfaces, BERT, RFC2544 and related test applications, the CX350 is able to test and troubleshoot backbone connections to the CMTS and verify the full bandwidth of a DOCSIS 3.0 network while operating in modem pass-through mode.
A high capacity LiIon battery pack supports a full day operation on a single charge while a high contrast full color TFT touch-screen with user selectable "skins" allows viewing in a variety of lighting conditions.
- Robust, lightweight chassis packed with powerful features for demanding environments and test conditions
- High resolution color 7" touch-screen with graphical user interface
- Fast system power up time in less than 20 seconds
- Ethernet LAN management port for remote control, back office applications, and workforce management
- Fast and efficient test result transfer to USB memory stick or FTP upload via LAN or DOCSIS ports
- Maintain instrument software, manage test setups and channel tables, process measurement results and generate customer test reports using included ReVeal™ PC software
- Extend field testing time using interchangeable Lilon battery pack/s
- Ability to lock user interface to prevent unwanted human interference during long-term testing
- Supports Triple Play test applications such as VoIP, IPTV and high speed Internet access via Ethernet management port, DOCSIS test port, or USB WiFi adaptor
- Frequency range from 5MHz to 1GHz
- Comprehensive SLM measurements (single channel, system scan, tilt, and installation check)
- Video and Audio power level measurements (Annex A, B, C signals)
- Forward and Return path QAM measurements (MER, Pre/Post BER, Constellation diagram, Histogram, and Equalizer on/off mode)
- Advanced Digital measurements* (HUM,EVM, Phase Jitter, Symbol Rate Error, Frequency Response, Group Delay)
- Dual Band DOCSIS 3.0 compliant Cable Modem*
- Spectrum view to capture impulse noise and interference
- Home Installation Procedure (HIP) with user defined test limits
- Built-in Upstream Generator* (CW, QPSK, QAM-16/64/128/256 modulation)
- Built-in TDR* - supports up to 2km/6000ft of standard coaxial cable
- Single DS1 Transmitter/Receiver with Balanced (100Ω) interfaces for full Rate DS1 and Fractional Nx64kbit/s or Nx56kbit/s testing
- Single 10/100/1000-T/X Ethernet port (BERT, Throughput, RFC2544 and Loopback testing)
- ISDN PRI (ANSI and ETSI) call setup*
Brochures
Release Notes
Software
Attention: DO NOT downgrade the software version currently installed in your test platform or module, unless specifically instructed by a VeEX Customer Care/Support agent. Your new test set may have been shipped with a newer version. For software upgrades, please check the current version(s) on your test set to confirm that the software posted here is a newer version and carefully read the Release Notes for the recommended platform versions.
Specification Sheet
Technical Notes
User Manuals
| Request a Demo | Contact Sales |
| Request a Quote | Financing |
| Register a Product | Locate a Partner |