TX300s Module
Replaced by TX340s Module
XFP/SFP Multi-service Platform
All-in-One Optical and Service Test Platform
A full featured portable test solution for OTN, SDH, SONET, PDH,DSn, Carrier Ethernet, Fibre Channel, CPRI/OBSAI networks as well as synchronization verification tests.The TX300s hardware option offers extensive support for Mobile Backhaul technologies with SyncE, 1588v2 PTP and CPRI/OBSAI Fronthaul. Up to two TX300s modules can be factory-installed in the TX300s platform, for full dual-port and independent dual-test capabilities
- All-in-one multi-service test solution
- XFP ports support Ethernet interface for 10GE, SDH STM-64, SONET OC-192, Fibre Channel 8G and 10G, OTN at OTU2, OTU1e/2e and CPRI
- SFP ports support Ethernet interface from 100Base-FX to 1GE, SDH from STM-0 to STM-16, SONET from OC-1 to OC-48, Fibre Channel from 1G to 4G, OTN at OTU1 and CPRI/OBSAI
- RJ45 ports support 10/100/1000Base-T
- RJ45/Bantam and BNC ports support PDH/DSn and G.703 64k Codirectional electrical interfaces
- Modules 1 and 2 support independent measurements
OTN/SDH/SONET/PDH/DSn
- Optical SDH/SONET testing for STM-0/1/4/16/64 and OC1/3/12/48/192; including STM-0/1e (STS-1/3) electrical
- OTN testing for ODU0, ODU Flex, OTU1, OTU2, OTU1e/OTU2e
- PDH/DSn testing at E1, E2, E3, E4, DS1, DS3
- G.703 64k Codirectional interface testing
- Non-intrusive Pulse Mask Analysis at E1, E3 and DS1, DS3 rates
- Automatic Protection Switching and Service Disruption
- Round Trip Delay on all interfaces and payload mappings
- Bi-directional Overhead Monitoring and Byte decoding
- Tandem Connection Monitoring
- Jitter and Wander Analysis (E1, E3, DS1, DS3, STM-1o, OC-3)
CPRI/OBSAI Testing
- Common Public Radio Interface standard (CPRI): supports all rates from 614.4 Mbps to 9.8304 Gbps
- Open Base Station Architecture Initiative (OBSAI): supports all rates from 768 Mbps to 6.144 Gbps
- Unframed, Layer 1 Framed and Layer 2 (REC/BBU and RE/RRH emulation) BER testing with PRBS stress patterns
- Latency measurements
Ethernet/Fibre Channel
- Up to two 10GE LAN/WAN supported by XFP ports
- Up to two 1000Base-X, 100Base-FX supported by SFP ports
- Up to two 10/100/1000Base-T supported by RJ45 ports
- 1G/2G/4G/8G/10G Fibre Channel support for Storage Area Networks
- RFC2544 Throughput, latency, frame loss and back to back tests
- V-SAM test suite compliant with ITU-T Y.1564 standard
- Q in Q (VLAN stacking), MPLS, MPLS-TP, PBB support
- RFC6349 V-PERF TCP test suite
- One way latency with optional built-in GPS
- Fully integrated solution for synchronized packet networks
- Supports IEEE 1588v2/PTP and SyncE/ITU-T G.8261 standards
- Master Clock and Slave clock emulation
- IEEE 1588v2/PTP protocol monitoring and decoding
- IEEE 1588v2/PTP PDV analysis
- Clock recovery from SyncE or PTP and output to physical port
- Wander measurement and MTIE/TDEV analysis
- ESMC SSM generation, monitoring, and decoding
Synchronization Testing
- Clock Wander and Phase (Time Error) Measurements
- MTIE/TDEV Wander Analysis
- Optional built-in chip-scale Atomic Clock
- GPS receiver for disciplining and time alignment
- SyncE and IEEE 1588v2 PTP emulation and Wander measurements
Brochures
Release Notes
Software
Attention: DO NOT downgrade the software version currently installed in your test platform or module, unless specifically instructed by a VeEX Customer Care/Support agent. Your new test set may have been shipped with a newer version. For software upgrades, please check the current version(s) on your test set to confirm that the software posted here is a newer version and carefully read the Release Notes for the recommended platform versions.
Specification Sheet
Technical Notes
User Manuals
| Request a Demo | Contact Sales |
| Request a Quote | Financing |
| Register a Product | Locate a Partner |