The RXT-4500/4510 OSA modules are Optical Spectrum/Channel Analyzers for CWDM and DWDM networks. Using superior micro-optic design and MEMS tuning technology, the modules measure key optical parameters such as wavelength, channel power, and OSNR.
- Precise measurement of WDM wavelengths
- Wide wavelength range
- High wavelength accuracy and resolution
- Built-in wavelength reference
- High power sensitivity
- Excellent power accuracy
- Rugged, reliable design - No moving parts
- Superior shock resistance
- Periodic calibration not required
- Ultra-low power consumption
- Low temperature sensitivity
- Intuitive operation with dedicated test functions
- Touch screen for simple zooming and navigation
- Battery operating time > 8 hours
- Wavelength range from 1260 to 1650 nm
- DWDM channel spacing down to 25 GHz, module dependent
- Resolution 0.1 nm C-band
- In-band OSNR measurement
- Fast continuous scanning at ≤ 5 sec
- Fast continuous scanning at ≤ 5 sec
- Simultaneous measurements of up to 200 channels, module dependent
- Channel power measurement
- Channel threshold detection
- Span power measurement
- Continuous sweep with min/max hold
- Channel frequency and wavelength delta vs. ITU grid
- High wavelength accuracy: ± 50 pm
- High dynamic range: ≥ 65 dB
- OSNR measurement: up to 40 dB
- Low Polarization Dependent Loss (PDL): < 0.3 dB
- Universal optical interface with industry standard adaptors
- Supports 10/40/100 Gbps transmission modulation types
- Optical Channel Checker Test Mode
- Drift Analysis Test Mode
- DWDM channel monitoring per ITU G.694.1 grid for 25/33/37.5/100/200 GHz, module dependent
- CWDM channel monitoring per ITU G.694.2 grid
- OSNR measurement compliant with IEC 61280-2-9
Brochures
Release Notes
Software
Attention: DO NOT downgrade the software version currently installed in your test platform or module, unless specifically instructed by a VeEX Customer Care/Support agent. Your new test set may have been shipped with a newer version. For software upgrades, please check the current version(s) on your test set to confirm that the software posted here is a newer version and carefully read the Release Notes for the recommended platform versions.
Attention: For RXT4500 OSA modules with SN prefix TS3, please DO NOT UPGRADE to new OSA module SW. This module is only compatible with RXT4500 SW 02.01.0007 and under. You may find that SW under Support > Software Update.
Specification Sheet
Technical Notes
User Manuals
* RXT-4500 OSA modules with serial # prefix TS3 are end of life. Software upgrades, calibration and repair services are no longer supported or offered.