CaLan® 3010H+ DOCSIS 3.X/4.0
Sweep System for DOCSIS 3.1 and 4.0
The CaLan 3010H+ Sweep System is designed for prequalification, installation, and maintenance of DOCSIS 3.1 and 4.0 networks. The unit consists of a high performance, 1.8 GHz Transmitter and a low noise, 204 MHz Receiver, capable of sweeping the entire Forward and Return path respectively.
- High resolution true non-interfering 1.8 GHz downstream sweep system with Manual and Automatic Gain & Slope Offsets
- 1U 19 inch Rackmount form factor, saving critical rack space in the Headend
- Fast and accurate Sweep for network maintenance
- Channel and Spectrum Scans modes
- Full integration with VeSion® system, supporting centralized control for sweep profiles and data collection, making it ideal for unmanned Headends
- Compatible with CX380s series and CM series field test sets
- Works with the AT3000 RF Switch Multiplexer
- Combined with In Service Sweep for a complete Forward Path Sweep, up to 1.8 GHz
- Return Path Sweep up to 204 MHz
- DigiSweep Fast Sweep technology helps maintenance technicians perform their task faster and easier then other solutions
- Non-Interfering Downstream Sweep for Analog and Digital Channels
- Dual Path mode eliminates the need for a separate Forward Sweep and Return Sweep instruments
- Higher resolution sweep identifies problems other sweep systems miss
- Automatic recovery following power outages
| Sweep Source (Forward) | |
|---|---|
| Output Frequency Range | 5 MHz to 1800 MHz |
| Output Level Range | +10 dBmV to +50 dBmV |
| Level Accuracy | ±1.5 dB |
| Source Output Return Loss | >10 dB |
| Sweep Pulse Frequency Accuracy | <30 kHz |
| (5 MHz to 1800 MHz) | |
| Sweep Receiver (Return) | |
|---|---|
| Input Frequency Range | 5 MHz to 204 MHz |
| Input Level Range | -10 dBmV to +15 dBmV |
| Input Frequency Resolution | 10 kHz |
| Input Return Loss | >10 dB |
| SNR (Avg) Comm. Ch. Detection | 25 dB Min. |
| Spurious | <-45 dBc |
| DC Blocking | 200 VDC |
| Data Transmission Pilot | |
|---|---|
| Range | 5 MHz to 1800 MHz |
| Data Carrier Modulation Bandwidth | <300 kHz |
| General Specifications | |
|---|---|
| Size (H x W x D) | 1.75” x 19” x 11.75” - 1 RU (Rack Units) high |
| Weight | 8 lbs (3.628 kg) |
| Operating Temperature | 5˚C to +40˚C |
| Storage Temperature | -40˚C to +70˚C |
| Power | |
| AC Adaptor | Input: 100-240 VAC, 50-60 Hz Output: 15 VDC, 4.6A |
| 48 VDC Power Option | DC Input range: -40 VDC to -60 VDC Max current: 2A at -48 VDC |
Brochures
Release Notes
Software
Attention: DO NOT downgrade the software version currently installed in your test platform or module, unless specifically instructed by a VeEX Customer Care/Support agent. Your new test set may have been shipped with a newer version. For software upgrades, please check the current version(s) on your test set to confirm that the software posted here is a newer version and carefully read the Release Notes for the recommended platform versions.
Specification Sheet
Technical Notes
User Manuals
| Request a Demo | Contact Sales |
| Request a Quote | Financing |
| Register a Product | Locate a Partner |
